Flat & HMO conversion steels · Hayes
Flat & HMO conversion steels in Hayes
Steelwork, approvals and making good for flat & HMO conversion steels in Hayes and nearby.
- Itemised written quote
- Beam sized by a structural engineer
- Covering Hayes and nearby
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Planning flat & HMO conversion steels in Hayes
If you live in Hayes, flat & HMO conversion steels can usually be planned and priced after a single survey visit. Our coverage runs across London, so nearby villages are included too. We cover UB1, UB2, UB3, UB4 and UB7, and we fix the price in writing once the layout and scope are agreed.
We supply and install steelwork for landlords, developers and their builders, working from the engineer's design and fitting in with the wider conversion. We arrange structural calculations, handle building control for the structural work or feed into your existing application, and fire protect the steel to the period the scheme requires.
What to expect
- Floors and walls between flats must resist the spread of fire, and steel holding up those floors needs protection to match. Where a beam passes through a separating wall or floor, the gaps around it are fire-stopped so the separation stays continuous.
- Keep the structural calculations, building control completion certificate and fire protection records together in one place. They are needed for signing off the conversion, and buyers, lenders and licensing officers may ask to see them later.
- Conversions add kitchens and bathrooms upstairs, so soil pipes, water supplies and extract ducts need routes through the structure. Steel and joist positions are coordinated with these runs, and steel should never be drilled or notched on site without the engineer's approval.
- The reduced 5% rate of VAT may apply to some conversion work, such as changing the number of dwellings in a building. Whether it applies depends on the details of the scheme, so confirm the position with your accountant before relying on it.
- Large Victorian and Edwardian houses are popular for conversion, but they bring timber lintels, chimney breasts, lime mortar and joists notched for old services. These are uncovered early so the engineer can account for them before any steel is ordered.
From survey to sign-off in Hayes
Look and measure
We check the wall, the span you want and what the wall is carrying, and photograph anything the engineer needs to see.
Design and price
Calculations come back from the engineer and we confirm your fixed written price, line by line.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Fit, inspect, finish
The work is propped and the steel installed and packed tight. After inspection the opening is boxed, plastered and left clean.
What do flat & HMO conversion steels cost in Hayes?
As a guide, budget £3,200–£11,500 including VAT for steelwork for a flat or HMO conversion in Hayes, based on published UK cost guides adjusted for London prices (+28%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Steelwork for a flat or HMO conversion | £3,200–£11,500 | Beams and posts for a revised layout, with approvals; fire and sound separation priced with the conversion |
| Building control fees | £320–£830 | Building notice or full plans fee and inspections; varies by council or approver |
| Load-bearing wall removal with steel beam | £2,550–£6,400 | Typical internal wall up to about 4 m: calculations, building control, propping, steel, padstones, fitting, fire protection and making good |
| Steel column or post | £640–£1,920 per column | Column supplied and fitted with base and cap plates on a pad foundation |
Figures include our approximate regional adjustment for London prices (+28%) and are rounded. How these figures are worked out.
Building control and neighbours in Hayes
In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either the local council's building control team or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.
Terraced and semi-detached homes often need party wall notices, because cutting into a shared wall to take a beam end is notifiable under the Party Wall etc. Act 1996. Allow at least two months for the notice period unless your neighbour agrees sooner.
Flat & HMO conversion steels in Hayes: your questions
How much do flat & HMO conversion steels cost in Hayes?
As a guide, budget £3,200–£11,500 including VAT for steelwork for a flat or HMO conversion in Hayes, based on published UK cost guides adjusted for London prices (+28%). The exact figure depends on the span, what the wall carries, access and the finish, and is fixed in writing once the scope is agreed.
What happens at the survey visit in Hayes?
We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.
Do I need an HMO licence before converting a house?
Possibly. Many HMOs need a licence from the local council, and some areas license smaller HMOs too. Licensing covers room sizes, amenities and fire safety, and it is separate from planning and building regulations. Check the council's requirements early, as they can affect the layout and therefore the steelwork needed.
Do I need building regulations to convert a house into flats?
Yes. Converting a house into flats is a material change of use, so the building has to meet requirements for fire safety, sound insulation, structure and other matters. In England and Wales that means a building control application, in Scotland a building warrant before work starts, and in Northern Ireland an application to council building control.
Can you install the steel while my main contractor runs the conversion?
Yes. On many conversions the steelwork is installed as a package within a wider build, working to the main contractor's programme and the engineer's design. We coordinate propping, deliveries and building control inspections for the steel so the other trades can follow on smoothly once it is in.
How soon can flat & HMO conversion steels start in Hayes?
Start dates depend on the engineer's calculations, the building control approval and, where needed, party wall notice periods. We give you a realistic timetable after the survey and keep you updated as each approval comes through.