Flat & HMO conversion steels · Dunbar
Flat & HMO conversion steels in Dunbar
Flat & HMO conversion steels for homes in EH42, designed by a structural engineer.
- Free survey visit in Dunbar
- Engineer's calculations arranged
- Building warrant handled for you
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Flat & HMO conversion steels in Dunbar: how it works
We carry out flat & HMO conversion steels in Dunbar, covering the EH42 postcode district. Our coverage runs across East Lothian, so nearby villages are included too. The job starts with a free survey visit so the engineer's calculations are based on your actual walls, floors and loads.
Turning a large house into flats or an HMO rarely leaves every wall where it was. Rooms are split and joined, kitchens and bathrooms appear on upper floors, and new stairs or corridors are formed. Each time a load-bearing wall moves, steel usually takes its place, and it has to suit the fire and sound standards of a building shared by several households.
What to expect
- Converting a house into flats is treated as a material change of use for building regulations purposes, so fire safety, sound insulation and other requirements apply across the building, not just to the structural work. The steelwork forms one part of that wider approval.
- Many HMOs need a licence from the local council, with conditions covering room sizes, shared facilities and fire safety. Licensing runs alongside building regulations rather than replacing them, so the layout and steelwork should suit both from the outset.
- Costs reflect how many walls move, the number of beams and columns, access for lifting steel to upper floors, the fire period required, phasing around other trades and whether existing foundations can take the new concentrated loads.
- Keep the structural calculations, building standards completion certificate and fire protection records together in one place. They are needed for signing off the conversion, and buyers, lenders and licensing officers may ask to see them later.
- Large Victorian and Edwardian houses are popular for conversion, but they bring timber lintels, chimney breasts, lime mortar and joists notched for old services. These are uncovered early so the engineer can account for them before any steel is ordered.
How the job runs in Dunbar
Free visit
A short visit to Dunbar to see the job, agree what you want and check the bearings, floors and services that affect the design.
Calculations
The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.
Building warrant
A building warrant is applied for from East Lothian Council, and work starts only once the warrant has been granted.
Steel in, made good
On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.
Guide prices for flat & HMO conversion steels in Dunbar
As a guide, budget £2,300–£8,200 including VAT for steelwork for a flat or HMO conversion in Dunbar, based on published UK cost guides adjusted for prices in Scotland (-9%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Steelwork for a flat or HMO conversion | £2,300–£8,200 | Beams and posts for a revised layout, with approvals; fire and sound separation priced with the conversion |
| Steel column or post | £460–£1,360 per column | Column supplied and fitted with base and cap plates on a pad foundation |
| Building warrant fee | £215–£435 | Statutory fee set by the estimated value of the work: £215 up to £5,000, rising on a sliding scale (fees from 1 April 2026) |
| Structural calculations for a beam | £230–£680 | Site measure or photos, beam and padstone design and calculations for building standards |
Figures include our approximate regional adjustment for prices in Scotland (-9%) and are rounded. How these figures are worked out.
Approvals in Dunbar
Steel beam work in Dunbar needs a building warrant from East Lothian Council. The structural design is part of the application, and the council's building standards team accepts the completion certificate once the work is done as approved.
Scotland has no Party Wall Act. Work affecting a shared wall is governed by your title deeds and the general law, and in flats by the Tenements (Scotland) Act 2004, so it is sensible to agree the work with neighbours in writing before starting.
Flat & HMO conversion steels near Dunbar
- North Berwick 8.7 mi
- Haddington 10.7 mi
- Tranent 17.4 mi
- Eyemouth 18.9 mi
- Musselburgh 21.1 mi
- Bonnyrigg 24.5 mi
Questions about flat & HMO conversion steels in Dunbar
Do you cover Dunbar for flat & HMO conversion steels?
Yes. We carry out flat & HMO conversion steels in Dunbar and the EH42 postcode districts. Book a free survey visit and we will check the wall, arrange the engineer's calculations and send an itemised written quote.
Do you also work near Dunbar?
Yes. We also cover nearby towns including North Berwick, Haddington, Tranent and Eyemouth.
Do I need freeholder consent to put a steel beam in my flat?
Usually, yes. If you own a leasehold flat, structural alterations normally need the freeholder's or landlord's written consent under the lease. In Scotland, the title deeds and the Tenements (Scotland) Act 2004 govern work affecting shared parts of the building. We can provide the calculations and drawings needed to support a consent request.
What steel beams are needed for a flat conversion?
It depends on how much the layout changes. Typical steelwork includes beams where load-bearing walls are removed, trimmers around new stair openings, and columns or frames where loads have to come down through the building. A structural engineer designs each element from the new layout and the existing structure, and the calculations go to building standards.
Does steel in a flat conversion need fire protection?
Yes, in almost all cases. Steel holding up floors that separate flats, or supporting escape routes, needs fire resistance to the period the scheme requires, which can be higher than in a single house. It is usually boxed with fire-rated board or coated with intumescent paint, and building standards inspects it before handover.
How soon can flat & HMO conversion steels start in Dunbar?
Start dates depend on the engineer's calculations, the building warrant and any agreement needed with neighbours. We give you a realistic timetable after the survey and keep you updated as each approval comes through.