Flat & HMO conversion steels · Cambridgeshire
Flat & HMO conversion steels in Cambridgeshire
Flat & HMO conversion steels across Cambridgeshire, designed by a structural engineer and signed off by building control.
- Itemised written quote
- Beam sized by a structural engineer
- Covering Cambridgeshire and nearby
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
About our flat & HMO conversion steels service in Cambridgeshire
Flat and HMO conversion steels are the beams, columns and frames needed when a house or building is reworked into self-contained flats or a house in multiple occupation. New layouts move walls, stairs and bathrooms, so steel picks up the loads that old walls used to carry, designed to work alongside the fire separation and sound insulation the conversion also needs.
Flat & HMO conversion steels are one of the most common structural jobs in homes across Cambridgeshire. We work in Huntingdon, Peterborough and Wisbech and the surrounding villages. Every job starts with a survey visit, then calculations from a structural engineer, so the steel suits the house in front of us rather than a rule of thumb.
What to expect
- Costs reflect how many walls move, the number of beams and columns, access for lifting steel to upper floors, the fire period required, phasing around other trades and whether existing foundations can take the new concentrated loads.
- The reduced 5% rate of VAT may apply to some conversion work, such as changing the number of dwellings in a building. Whether it applies depends on the details of the scheme, so confirm the position with your accountant before relying on it.
- Many HMOs need a licence from the local council, with conditions covering room sizes, shared facilities and fire safety. Licensing runs alongside building regulations rather than replacing them, so the layout and steelwork should suit both from the outset.
- Separating floors and walls also have to meet sound insulation standards. Steel connections and boxing are detailed so they do not leave gaps or rigid paths for noise, and sound testing near completion checks that the separating construction performs.
- Conversions add kitchens and bathrooms upstairs, so soil pipes, water supplies and extract ducts need routes through the structure. Steel and joist positions are coordinated with these runs, and steel should never be drilled or notched on site without the engineer's approval.
From survey to sign-off in Cambridgeshire
Look and measure
We check the wall, the span you want and what the wall is carrying, and photograph anything the engineer needs to see.
Design and price
Calculations come back from the engineer and we confirm your fixed written price, line by line.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Fit, inspect, finish
The work is propped and the steel installed and packed tight. After inspection the opening is boxed, plastered and left clean.
How much should I budget in Cambridgeshire?
As a guide, budget £2,650–£9,550 including VAT for steelwork for a flat or HMO conversion in Cambridgeshire, based on published UK cost guides adjusted for prices in the East of England (+6%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Steelwork for a flat or HMO conversion | £2,650–£9,550 | Beams and posts for a revised layout, with approvals; fire and sound separation priced with the conversion |
| Structural calculations for a beam | £260–£800 | Site measure or photos, beam and padstone design and calculations for building control |
| Building control fees | £260–£690 | Building notice or full plans fee and inspections; varies by council or approver |
| Load-bearing wall removal with steel beam | £2,100–£5,300 | Typical internal wall up to about 4 m: calculations, building control, propping, steel, padstones, fitting, fire protection and making good |
Figures include our approximate regional adjustment for prices in the East of England (+6%) and are rounded. How these figures are worked out.
Approvals in Cambridgeshire
In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either the local council's building control team or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.
Terraced and semi-detached homes often need party wall notices, because cutting into a shared wall to take a beam end is notifiable under the Party Wall etc. Act 1996. Allow at least two months for the notice period unless your neighbour agrees sooner.
Flat & HMO conversion steels by town
Local questions answered
Which towns in Cambridgeshire do you cover?
We cover towns including Peterborough, Cambridge, Wisbech and St Neots, plus the villages and smaller towns around them.
Can I stay at home while the work is done in Cambridgeshire?
Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.
What steel beams are needed for a flat conversion?
It depends on how much the layout changes. Typical steelwork includes beams where load-bearing walls are removed, trimmers around new stair openings, and columns or frames where loads have to come down through the building. A structural engineer designs each element from the new layout and the existing structure, and the calculations go to building control.
Do I need building regulations to convert a house into flats?
Yes. Converting a house into flats is a material change of use, so the building has to meet requirements for fire safety, sound insulation, structure and other matters. In England and Wales that means a building control application, in Scotland a building warrant before work starts, and in Northern Ireland an application to council building control.
Does steel in a flat conversion need fire protection?
Yes, in almost all cases. Steel holding up floors that separate flats, or supporting escape routes, needs fire resistance to the period the scheme requires, which can be higher than in a single house. It is usually boxed with fire-rated board or coated with intumescent paint, and building control inspects it before handover.
Do I need planning permission to convert a house into an HMO?
You may, depending on the size of the HMO, where it is and any local restrictions. In some areas smaller HMOs can be formed without a planning application, while larger ones, and conversions into self-contained flats, usually need permission. Check with the local planning authority before committing to a layout and its steelwork.