Flat & HMO conversion steels · Craigavon
Flat & HMO conversion steels in Craigavon
Flat & HMO conversion steels for homes in BT63, BT64, BT65, designed by a structural engineer.
- Survey, design and installation in one
- Covering BT63, BT64, BT65
- Inspected before it is covered
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Flat & HMO conversion steels in Craigavon: how it works
We cover flat & HMO conversion steels in Craigavon (BT63, BT64, BT65) and the streets around it. The wider Armagh City, Banbridge and Craigavon area is covered as well. Each job is designed by a structural engineer and approved through Armagh City, Banbridge and Craigavon Borough Council before work begins.
We supply and install steelwork for landlords, developers and their builders, working from the engineer's design and fitting in with the wider conversion. We arrange structural calculations, handle building control for the structural work or feed into your existing application, and fire protect the steel to the period the scheme requires.
Worth knowing before you start
- Where the building is leasehold, or an existing flat is being altered, the freeholder's written consent is normally needed for structural changes. Lenders may also want to see building control sign-off before releasing funds on a converted property.
- Separating floors and walls also have to meet sound insulation standards. Steel connections and boxing are detailed so they do not leave gaps or rigid paths for noise, and sound testing near completion checks that the separating construction performs.
- The reduced 5% rate of VAT may apply to some conversion work, such as changing the number of dwellings in a building. Whether it applies depends on the details of the scheme, so confirm the position with your accountant before relying on it.
- Many HMOs need a licence from the local council, with conditions covering room sizes, shared facilities and fire safety. Licensing runs alongside building regulations rather than replacing them, so the layout and steelwork should suit both from the outset.
- Costs reflect how many walls move, the number of beams and columns, access for lifting steel to upper floors, the fire period required, phasing around other trades and whether existing foundations can take the new concentrated loads.
Four stages, one team
Survey in Craigavon
We visit, look at the wall and what sits above it, measure the opening and note services, access and how the steel can be brought in.
Engineer's design
A structural engineer sizes the beam, padstones and any posts, and sets out the temporary support needed while the wall is out.
Building control
A full plans application or building notice goes to Armagh City, Banbridge and Craigavon Borough Council under the Building Regulations (Northern Ireland) 2012 before work begins.
Install and sign-off
Props go in, the opening is formed, the steel is set and packed, building control inspects it, and we make good.
What do flat & HMO conversion steels cost in Craigavon?
As a guide, budget £2,150–£7,750 including VAT for steelwork for a flat or HMO conversion in Craigavon, based on published UK cost guides adjusted for prices in Northern Ireland (-14%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Steelwork for a flat or HMO conversion | £2,150–£7,750 | Beams and posts for a revised layout, with approvals; fire and sound separation priced with the conversion |
| Structural calculations for a beam | £220–£640 | Site measure or photos, beam and padstone design and calculations for building control |
| Loft conversion steels | £2,150–£5,150 | Supply and fit of floor and ridge steels on padstones, including lifting into the roof space |
| Building control fees | £220–£560 | Building notice or full plans fee and inspections; varies by council or approver |
Figures include our approximate regional adjustment for prices in Northern Ireland (-14%) and are rounded. How these figures are worked out.
Approvals in Craigavon
Building control in Craigavon is run by Armagh City, Banbridge and Craigavon Borough Council. Beams and new openings are controlled work under the Northern Ireland regulations, so we apply before anything is removed and the steel is inspected before it is covered.
The Party Wall etc. Act does not extend to Northern Ireland. Shared walls are dealt with under your title and the general law, so we recommend agreeing access and the work with your neighbour before it starts.
Flat & HMO conversion steels in Craigavon: your questions
How much do flat & HMO conversion steels cost in Craigavon?
As a guide, budget £2,150–£7,750 including VAT for steelwork for a flat or HMO conversion in Craigavon, based on published UK cost guides adjusted for prices in Northern Ireland (-14%). The exact figure depends on the span, what the wall carries, access and the finish, and is fixed in writing once the scope is agreed.
Who approves flat & HMO conversion steels in Craigavon?
Structural work in Craigavon needs a full plans application or building notice to Armagh City, Banbridge and Craigavon Borough Council. We prepare and submit it with the structural engineer's calculations and arrange the inspections, so the completion paperwork follows the job.
Do I need an HMO licence before converting a house?
Possibly. Many HMOs need a licence from the local council, and some areas license smaller HMOs too. Licensing covers room sizes, amenities and fire safety, and it is separate from planning and building regulations. Check the council's requirements early, as they can affect the layout and therefore the steelwork needed.
What steel beams are needed for a flat conversion?
It depends on how much the layout changes. Typical steelwork includes beams where load-bearing walls are removed, trimmers around new stair openings, and columns or frames where loads have to come down through the building. A structural engineer designs each element from the new layout and the existing structure, and the calculations go to building control.
Can you install the steel while my main contractor runs the conversion?
Yes. On many conversions the steelwork is installed as a package within a wider build, working to the main contractor's programme and the engineer's design. We coordinate propping, deliveries and building control inspections for the steel so the other trades can follow on smoothly once it is in.
How soon can flat & HMO conversion steels start in Craigavon?
Start dates depend on the engineer's calculations, the building control approval and any agreement needed with neighbours. We give you a realistic timetable after the survey and keep you updated as each approval comes through.