Bi-fold & sliding door openings · Pembroke Dock
Bi-fold & sliding door openings in Pembroke Dock
Steelwork, approvals and making good for bi-fold & sliding door openings in Pembroke Dock and nearby.
- Survey, design and installation in one
- Covering SA71, SA72, SA73
- Inspected before it is covered
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
About our bi-fold & sliding door openings service in Pembroke Dock
We cover bi-fold & sliding door openings in Pembroke Dock (SA71, SA72, SA73) and the streets around it. We also cover the surrounding towns and villages in Pembrokeshire. Each job is designed by a structural engineer and approved through Pembrokeshire County Council before work begins.
We coordinate the structure with your door supplier's sizes, so the finished opening matches the frame. The survey visit, structural calculations from a qualified engineer, building control, propping, steel, cavity trays, weather protection while the wall is open and making good are all covered in one itemised written quote.
Worth knowing before you start
- In cavity walls a cavity tray above the new head directs any water in the cavity out through weep vents. Without it, damp can show inside above the doors, so the tray is lapped and sealed correctly as the brickwork is rebuilt.
- External walls can have gas meters, boiler flues, soil pipes, outside taps or cables near the new opening. These are found at survey and moved by the right trade, with any gas pipework done by a Gas Safe registered engineer as the law requires.
- Door suppliers quote a structural opening size, which allows for the frame and fixing tolerances. Agreeing that size before the steel is designed avoids reveals that are too tight or gaps that have to be packed out later.
- A wide glazed opening changes the security of the back of the house. During the works the opening is boarded at night if the doors are not yet fitted, and it is worth checking the locking and glass specification of the doors you choose.
- Both leaves of a cavity wall need support over the opening. Depending on the design, the outer brickwork may sit on a plate fixed to the beam or on a separate external lintel, and the engineer specifies which suits the loads and the look.
From survey to sign-off in Pembroke Dock
Survey in Pembroke Dock
We visit, look at the wall and what sits above it, measure the opening and note services, access and how the steel can be brought in.
Engineer's design
A structural engineer sizes the beam, padstones and any posts, and sets out the temporary support needed while the wall is out.
Building control
We submit the application or notice to Pembrokeshire County Council under the Building Regulations as they apply in Wales, before work starts.
Install and sign-off
Props go in, the opening is formed, the steel is set and packed, building control inspects it, and we make good.
What do bi-fold & sliding door openings cost in Pembroke Dock?
As a guide, budget £2,300–£6,350 including VAT for rear wall opening for bi-fold or sliding doors in Pembroke Dock, based on published UK cost guides adjusted for prices in Wales (-9%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Rear wall opening for bi-fold or sliding doors | £2,300–£6,350 | External wall opened up to about 5 m with steel, propping, cavity tray and making good (doors supplied separately) |
| Lintel replacement | £360–£1,090 per lintel | Propping, removing the old lintel, new lintel set on beds and brickwork made good |
| Opening into a rear extension | £2,300–£6,350 | Original rear wall removed with a beam or goalpost, approvals and propping, coordinated with the extension build |
| Widening an internal doorway | £910–£2,280 | Opening widened with a new lintel or short beam, approval where structural, and making good |
Figures include our approximate regional adjustment for prices in Wales (-9%) and are rounded. How these figures are worked out.
Building control and neighbours in Pembroke Dock
In Wales, structural alterations come under the Building Regulations 2010 as they apply in Wales. Pembrokeshire County Council handles building control for Pembroke Dock. For work started or approved from 1 July 2026, the Welsh system uses an application to building control, dutyholders appointed in writing, a commencement notice before work starts and a compliance statement at the end.
Where the steel bears into a wall shared with next door, notice must be served under the Party Wall etc. Act 1996. If your neighbour dissents, surveyors agree how the work is done before it starts.
Bi-fold & sliding door openings near Pembroke Dock
- Pembroke 1.8 mi
- Milford Haven 4.4 mi
- Haverfordwest 7.5 mi
- Tenby 10.5 mi
Local questions answered
Can I stay at home while the work is done in Pembroke Dock?
Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.
Can you work on older or listed homes in Pembroke Dock?
Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.
Why does the beam need to be stiffer for glazed doors?
Because glazed doors tolerate very little movement. Every beam bends slightly under load, and with bi-folds or sliders that movement can make panels bind, tracks drag or glass crack. The engineer sets a stricter deflection limit for these openings, which often means a heavier section than strength alone would need.
What does a bi-fold opening quote include?
Our itemised written quote covers the survey, calculations, building control, propping, removing the wall, steel and padstones, outer leaf support, cavity trays and closers, temporary weather protection and making good. Doors, threshold drainage and patio work are shown separately unless agreed. The price is fixed in writing once the opening size and specification are agreed.
How wide can a bi-fold door opening be?
There is no fixed limit, as it depends on the loads above and what the beam can bear on. The engineer designs the steel and, for very wide openings or ones near a corner, may specify columns or a goalpost frame. The door system's own maximum panel sizes and configurations also need checking.
How soon can bi-fold & sliding door openings start in Pembroke Dock?
Start dates depend on the engineer's calculations, the building control approval and, where needed, party wall notice periods. We give you a realistic timetable after the survey and keep you updated as each approval comes through.