West Sussex · England
Steel beam installers in Littlehampton
RSJs and steel beams for homes and businesses in Littlehampton, with calculations, approvals, propping and making good.
- Itemised written quote
- Beam sized by a structural engineer
- Covering Littlehampton and nearby
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Steel beam work in Littlehampton
We install steel beams and RSJs in Littlehampton, covering BN16, BN17 and BN18. Littlehampton is around 7.2 miles from Worthing, and we cover both. Common jobs here are knock-throughs, load-bearing wall removal, chimney breasts and openings into new extensions.
Approval in Littlehampton is through council building control or a registered building control approver, and party wall notices apply where steel bears into a shared wall.
Services in Littlehampton
Wall removal & knock-throughs
- Load-bearing wall removal
- Kitchen-diner knock-throughs
- Through-lounge knock-throughs
- Chimney breast removal
New & wider openings
- Wider doorways & openings
- Bi-fold & sliding door openings
- Garage conversion openings
- Lintel replacement
Extensions, lofts & basements
Beams, frames & columns
Design & approvals
- Structural calculations
- Building control sign-off
- Party wall beam works
- Fire protection for steel beams
Site works & commercial
Four stages, one team
Free visit
A short visit to Littlehampton to see the job, agree what you want and check the bearings, floors and services that affect the design.
Calculations
The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Steel in, made good
On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.
Guide prices in Littlehampton
As a guide, budget £2,250–£5,600 including VAT for load-bearing wall removal with steel beam in Littlehampton, based on published UK cost guides adjusted for prices in the South East (+12%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Load-bearing wall removal with steel beam | £2,250–£5,600 | Typical internal wall up to about 4 m: calculations, building control, propping, steel, padstones, fitting, fire protection and making good |
| Chimney breast removal (ground floor) | £1,700–£3,350 | Ground-floor breast removed, steel to support the breast above, building control and making good |
| Rear wall opening for bi-fold or sliding doors | £2,800–£7,850 | External wall opened up to about 5 m with steel, propping, cavity tray and making good (doors supplied separately) |
| Loft conversion steels | £2,800–£6,700 | Supply and fit of floor and ridge steels on padstones, including lifting into the roof space |
| Structural calculations for a beam | £280–£840 | Site measure or photos, beam and padstone design and calculations for building control |
Figures include our approximate regional adjustment for prices in the South East (+12%) and are rounded. How these figures are worked out.
Building rules in Littlehampton
For Littlehampton, building control is provided by the local council's building control team, or by a registered building control approver if preferred. We send them the engineer's calculations with a building notice or full plans application and book the inspections. Work done without approval can cause problems at sale and is far dearer to put right later.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Near Littlehampton
- Bognor Regis 6.4 mi
- Worthing 7.2 mi
- Chichester 10.6 mi
- Portslade 14.3 mi
- Hove 16.4 mi
- Brighton 17.6 mi
Steel beams in Littlehampton: questions
Who approves steel beam installation in Littlehampton?
Structural work in Littlehampton needs a building notice or full plans application to the local council's building control team or a registered building control approver. We prepare and submit it with the structural engineer's calculations and arrange the inspections, so the completion paperwork follows the job.
How much does steel beam installation cost in Littlehampton?
As a guide, budget £2,250–£5,600 including VAT for load-bearing wall removal with steel beam in Littlehampton, based on published UK cost guides adjusted for prices in the South East (+12%). The exact figure depends on the span, what the wall carries, access and the finish, and is fixed in writing once the scope is agreed.
What happens at the survey visit in Littlehampton?
We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.
Can you work on older or listed homes in Littlehampton?
Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.
Do you also work near Littlehampton?
Yes. We also cover nearby towns including Bognor Regis, Worthing, Chichester and Portslade.