Hertfordshire · England
Steel beam installers in Stevenage
RSJs and steel beams for homes and businesses in Stevenage, with calculations, approvals, propping and making good.
- Survey, design and installation in one
- Covering SG1, SG2, SG3
- Inspected before it is covered
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Steel beam work in Stevenage
Steel beam work in Stevenage covers everything from widening a doorway to opening the whole rear wall. It sits about 9.3 miles from Luton, which we also cover. We survey, arrange the engineer's calculations and local building control, then fit and make good.
Approval in Stevenage is through council building control or a registered building control approver, and party wall notices apply where steel bears into a shared wall.
Services in Stevenage
Wall removal & knock-throughs
- Load-bearing wall removal
- Kitchen-diner knock-throughs
- Through-lounge knock-throughs
- Chimney breast removal
New & wider openings
- Wider doorways & openings
- Bi-fold & sliding door openings
- Garage conversion openings
- Lintel replacement
Extensions, lofts & basements
Beams, frames & columns
Design & approvals
- Structural calculations
- Building control sign-off
- Party wall beam works
- Fire protection for steel beams
Site works & commercial
What happens, step by step
Look and measure
We check the wall, the span you want and what the wall is carrying, and photograph anything the engineer needs to see.
Design and price
Calculations come back from the engineer and we confirm your fixed written price, line by line.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Fit, inspect, finish
The work is propped and the steel installed and packed tight. After inspection the opening is boxed, plastered and left clean.
Guide prices in Stevenage
As a guide, budget £2,100–£5,300 including VAT for load-bearing wall removal with steel beam in Stevenage, based on published UK cost guides adjusted for prices in the East of England (+6%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Load-bearing wall removal with steel beam | £2,100–£5,300 | Typical internal wall up to about 4 m: calculations, building control, propping, steel, padstones, fitting, fire protection and making good |
| Chimney breast removal (ground floor) | £1,600–£3,200 | Ground-floor breast removed, steel to support the breast above, building control and making good |
| Rear wall opening for bi-fold or sliding doors | £2,650–£7,400 | External wall opened up to about 5 m with steel, propping, cavity tray and making good (doors supplied separately) |
| Loft conversion steels | £2,650–£6,350 | Supply and fit of floor and ridge steels on padstones, including lifting into the roof space |
| Structural calculations for a beam | £260–£800 | Site measure or photos, beam and padstone design and calculations for building control |
Figures include our approximate regional adjustment for prices in the East of England (+6%) and are rounded. How these figures are worked out.
Building rules in Stevenage
For Stevenage, building control is provided by the local council's building control team, or by a registered building control approver if preferred. We send them the engineer's calculations with a building notice or full plans application and book the inspections. Work done without approval can cause problems at sale and is far dearer to put right later.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Near Stevenage
- Hitchin 4.8 mi
- Letchworth Garden City 5.4 mi
- Welwyn Garden City 6.9 mi
- Harpenden 8.8 mi
- Hertford 9.1 mi
- Luton 9.3 mi
Steel beams in Stevenage: questions
Can I stay at home while the work is done in Stevenage?
Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.
What happens at the survey visit in Stevenage?
We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.
How soon can steel beam installation start in Stevenage?
Start dates depend on the engineer's calculations, the building control approval and, where needed, party wall notice periods. We give you a realistic timetable after the survey and keep you updated as each approval comes through.
Do you also work near Stevenage?
Yes. We also cover nearby towns including Hitchin, Letchworth Garden City, Welwyn Garden City and Harpenden.
How much does steel beam installation cost in Stevenage?
As a guide, budget £2,100–£5,300 including VAT for load-bearing wall removal with steel beam in Stevenage, based on published UK cost guides adjusted for prices in the East of England (+6%). The exact figure depends on the span, what the wall carries, access and the finish, and is fixed in writing once the scope is agreed.