County Durham · England
Steel beam installers in Thornaby-on-Tees
RSJs and steel beams for homes and businesses in Thornaby-on-Tees, with calculations, approvals, propping and making good.
- Survey, design and installation in one
- Covering TS15, TS16, TS17
- Inspected before it is covered
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Steel beam work in Thornaby-on-Tees
We install steel beams and RSJs in Thornaby-on-Tees, covering TS15, TS16, TS17 and TS18. We also work in nearby Middlesbrough, roughly 4.0 miles away. Common jobs here are knock-throughs, load-bearing wall removal, chimney breasts and openings into new extensions.
Approval in Thornaby-on-Tees is through council building control or a registered building control approver, and party wall notices apply where steel bears into a shared wall.
Services in Thornaby-on-Tees
Wall removal & knock-throughs
- Load-bearing wall removal
- Kitchen-diner knock-throughs
- Through-lounge knock-throughs
- Chimney breast removal
New & wider openings
- Wider doorways & openings
- Bi-fold & sliding door openings
- Garage conversion openings
- Lintel replacement
Extensions, lofts & basements
Beams, frames & columns
Design & approvals
- Structural calculations
- Building control sign-off
- Party wall beam works
- Fire protection for steel beams
Site works & commercial
What happens, step by step
Free visit
A short visit to Thornaby-on-Tees to see the job, agree what you want and check the bearings, floors and services that affect the design.
Calculations
The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.
Building control
We submit a building notice or full plans application to Stockton-on-Tees Borough Council, so approval is in place before the wall is touched.
Steel in, made good
On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.
Guide prices in Thornaby-on-Tees
As a guide, budget £1,850–£4,650 including VAT for load-bearing wall removal with steel beam in Thornaby-on-Tees, based on published UK cost guides adjusted for prices in the North East (-7%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Load-bearing wall removal with steel beam | £1,850–£4,650 | Typical internal wall up to about 4 m: calculations, building control, propping, steel, padstones, fitting, fire protection and making good |
| Chimney breast removal (ground floor) | £1,400–£2,800 | Ground-floor breast removed, steel to support the breast above, building control and making good |
| Rear wall opening for bi-fold or sliding doors | £2,300–£6,500 | External wall opened up to about 5 m with steel, propping, cavity tray and making good (doors supplied separately) |
| Loft conversion steels | £2,300–£5,600 | Supply and fit of floor and ridge steels on padstones, including lifting into the roof space |
| Structural calculations for a beam | £230–£700 | Site measure or photos, beam and padstone design and calculations for building control |
Figures include our approximate regional adjustment for prices in the North East (-7%) and are rounded. How these figures are worked out.
Building rules in Thornaby-on-Tees
In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either Stockton-on-Tees Borough Council or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Near Thornaby-on-Tees
- Stockton-on-Tees 2.5 mi
- Billingham 3.9 mi
- Middlesbrough 4.0 mi
- Darlington 10.1 mi
- Hartlepool 11.1 mi
- Redcar 11.2 mi
Steel beams in Thornaby-on-Tees: questions
Do I need a party wall agreement for steel beam installation in Thornaby-on-Tees?
Yes, if the beam bears into a shared wall: the Party Wall etc. Act 1996 applies in England and Wales, and a party structure notice must be served at least two months before that work starts. We arrange it through a party wall surveyor.
Can you work on older or listed homes in Thornaby-on-Tees?
Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.
Can I stay at home while the work is done in Thornaby-on-Tees?
Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.
Do you also work near Thornaby-on-Tees?
Yes. We also cover nearby towns including Stockton-on-Tees, Billingham, Middlesbrough and Darlington.
Do you cover Thornaby-on-Tees for steel beam installation?
Yes. We carry out steel beam installation in Thornaby-on-Tees and the TS15, TS16, TS17 and TS18 postcode districts. Book a free survey visit and we will check the wall, arrange the engineer's calculations and send an itemised written quote.