Wider doorways & openings · Richmond
Wider doorways & openings in Richmond
Wider doorways & openings for homes in SW14, TW1, TW2, designed by a structural engineer.
- Free survey visit in Richmond
- Engineer's calculations arranged
- Building control handled for you
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
About our wider doorways & openings service in Richmond
Wider doorways & openings in Richmond are planned around the house, not a standard kit. Our coverage runs across London, so nearby villages are included too. We visit, measure and check what the wall carries, then arrange calculations and building control approval before any steel is ordered.
We arrange a survey visit, structural calculations where the wall is load-bearing, building control, propping, the lintel or beam, new door linings if you want them, and making good. One itemised written quote covers the lot, and the price is fixed in writing once the opening size and finish are agreed.
Key points for your project
- Openings are cut with a masonry saw where possible rather than broken out with a hammer. Clean cuts keep the brickwork either side sound, give a straighter edge for plastering and send less vibration through the rest of the wall.
- Forming or widening an opening in a load-bearing wall is building work needing building regulations approval in England and Wales. In Scotland a building warrant is required before work starts, and in Northern Ireland an application is made to the council's building control.
- Each side of the new opening needs enough solid wall for the lintel or beam to sit on. If the opening runs close to a corner, another doorway or a chimney breast, there may not be enough masonry, and a column or padstone may be required.
- Widening a single doorway in a load-bearing wall usually takes one to two days for the structural work. The plaster then needs time to dry before the door linings are decorated or a new door is hung.
- Widening doorways is a frequent adaptation for wheelchair users and people using walking frames. Where a council grant or adaptation scheme is helping to pay, check its requirements for clear opening width before the opening is designed.
How the job runs in Richmond
Free visit
A short visit to Richmond to see the job, agree what you want and check the bearings, floors and services that affect the design.
Calculations
The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Steel in, made good
On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.
How much should I budget in Richmond?
As a guide, budget £1,300–£3,200 including VAT for widening an internal doorway in Richmond, based on published UK cost guides adjusted for London prices (+28%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Widening an internal doorway | £1,300–£3,200 | Opening widened with a new lintel or short beam, approval where structural, and making good |
| Load-bearing wall removal with steel beam | £2,550–£6,400 | Typical internal wall up to about 4 m: calculations, building control, propping, steel, padstones, fitting, fire protection and making good |
| Building control fees | £320–£830 | Building notice or full plans fee and inspections; varies by council or approver |
| Structural calculations for a beam | £320–£960 | Site measure or photos, beam and padstone design and calculations for building control |
Figures include our approximate regional adjustment for London prices (+28%) and are rounded. How these figures are worked out.
Approvals in Richmond
For Richmond, building control is provided by the local council's building control team, or by a registered building control approver if preferred. We send them the engineer's calculations with a building notice or full plans application and book the inspections. Work done without approval can cause problems at sale and is far dearer to put right later.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Wider doorways & openings in Richmond: your questions
Do I need a party wall agreement for wider doorways & openings in Richmond?
Yes, if the beam bears into a shared wall: the Party Wall etc. Act 1996 applies in England and Wales, and a party structure notice must be served at least two months before that work starts. We arrange it through a party wall surveyor.
Can you work on older or listed homes in Richmond?
Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.
Can I move a doorway to a different position?
Usually, yes. The old doorway is blocked up and a new opening is formed with the support the engineer specifies, and both changes are dealt with together for building control if the wall is structural. Moving a door can release wall space for furniture or a better kitchen or bedroom layout.
How wide can I make a doorway?
That depends on the wall, what it carries and how much solid wall is left at each side for the support to bear on, and a structural engineer sets the limit. Many people go from a single door to a double-width opening, and beyond that the job starts to become a partial wall removal.
What if there is a radiator or switch where the new opening goes?
It gets moved before the opening is cut. Radiators and pipework are relocated by a heating engineer, and switches and sockets by an electrician, with notifiable electrical work in England meeting Part P. These items are priced separately in the quote, so you can see what each one adds.
Do you cover Richmond for wider doorways & openings?
Yes. We carry out wider doorways & openings in Richmond and the SW14, TW1, TW2, TW3 and TW7 postcode districts. Book a free survey visit and we will check the wall, arrange the engineer's calculations and send an itemised written quote.