Wider doorways & openings · Tiverton
Wider doorways & openings in Tiverton
Wider doorways & openings for homes in EX16, designed by a structural engineer.
- Free survey visit in Tiverton
- Engineer's calculations arranged
- Building control handled for you
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
About our wider doorways & openings service in Tiverton
If you live in Tiverton, wider doorways & openings can usually be planned and priced after a single survey visit. We also work in nearby Exeter, roughly 12.4 miles away. We cover EX16, and we fix the price in writing once the layout and scope are agreed.
We arrange a survey visit, structural calculations where the wall is load-bearing, building control, propping, the lintel or beam, new door linings if you want them, and making good. One itemised written quote covers the lot, and the price is fixed in writing once the opening size and finish are agreed.
Things to plan for
- Older door surrounds and walls can hide asbestos in textured coatings, insulating board above doors or panelling. In buildings built before 2000 it must be identified before the wall is cut, so a refurbishment survey of the area is arranged where there is a risk.
- Widening a single doorway in a load-bearing wall usually takes one to two days for the structural work. The plaster then needs time to dry before the door linings are decorated or a new door is hung.
- Openings are cut with a masonry saw where possible rather than broken out with a hammer. Clean cuts keep the brickwork either side sound, give a straighter edge for plastering and send less vibration through the rest of the wall.
- The main cost factors are whether the wall is structural, the width of the opening, what the support bears onto, how much electrical or heating work has to move, and whether you want new door linings and doors fitted as part of the job.
- In hallways, a new or wider opening into the living room can affect the protected route from the stairs to the front door. Building control may require fire doors, smoke alarms or other measures, especially in houses with three or more storeys.
How the job runs in Tiverton
Look and measure
We check the wall, the span you want and what the wall is carrying, and photograph anything the engineer needs to see.
Design and price
Calculations come back from the engineer and we confirm your fixed written price, line by line.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Fit, inspect, finish
The work is propped and the steel installed and packed tight. After inspection the opening is boxed, plastered and left clean.
Guide prices for wider doorways & openings in Tiverton
As a guide, budget £1,050–£2,600 including VAT for widening an internal doorway in Tiverton, based on published UK cost guides adjusted for prices in the South West (+3%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Widening an internal doorway | £1,050–£2,600 | Opening widened with a new lintel or short beam, approval where structural, and making good |
| Structural calculations for a beam | £260–£770 | Site measure or photos, beam and padstone design and calculations for building control |
| Load-bearing wall removal with steel beam | £2,050–£5,150 | Typical internal wall up to about 4 m: calculations, building control, propping, steel, padstones, fitting, fire protection and making good |
| RSJ supply and fit (single beam) | £820–£2,580 per beam | Beam supplied, delivered, lifted and packed on padstones, with propping (calculations and approval priced separately) |
Figures include our approximate regional adjustment for prices in the South West (+3%) and are rounded. How these figures are worked out.
Building rules for Tiverton
For Tiverton, building control is provided by the local council's building control team, or by a registered building control approver if preferred. We send them the engineer's calculations with a building notice or full plans application and book the inspections. Work done without approval can cause problems at sale and is far dearer to put right later.
Terraced and semi-detached homes often need party wall notices, because cutting into a shared wall to take a beam end is notifiable under the Party Wall etc. Act 1996. Allow at least two months for the notice period unless your neighbour agrees sooner.
Questions about wider doorways & openings in Tiverton
Do you cover Tiverton for wider doorways & openings?
Yes. We carry out wider doorways & openings in Tiverton and the EX16 postcode districts. Book a free survey visit and we will check the wall, arrange the engineer's calculations and send an itemised written quote.
Can I stay at home while the work is done in Tiverton?
Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.
How long does it take to widen a doorway?
The structural part usually takes one to two working days: propping, cutting the opening, fitting the lintel or beam and packing it. Plastering follows, then a few days of drying before linings are painted or a new door is hung. Building control inspection fits in once the support is in place.
Will widening a doorway make a mess?
There is some dust and noise, mainly on the day the opening is cut. We screen the area, protect floors along the route and use dust extraction on saws where possible. Rooms either side are affected for a day or two, while the rest of the house stays in normal use.
What if there is a radiator or switch where the new opening goes?
It gets moved before the opening is cut. Radiators and pipework are relocated by a heating engineer, and switches and sockets by an electrician, with notifiable electrical work in England meeting Part P. These items are priced separately in the quote, so you can see what each one adds.