Wider doorways & openings · Angus
Wider doorways & openings in Angus
Survey, engineer's design and installation of wider doorways & openings anywhere in Angus.
- Survey, design and installation in one
- Covering DD11, DD7, DD8, DD9
- Inspected before it is covered
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
What wider doorways & openings involve in Angus
Wider doorways and openings are gaps formed or enlarged in internal walls, with a lintel or steel beam carrying the masonry and loads above. They sit between a simple door change and a full wall removal: the span is shorter, but each opening still needs the right support and approval if the wall is structural.
From the first survey visit to the completion certificate, we take care of wider doorways & openings across Angus. We can survey in places such as Montrose, Forfar and Brechin and the villages around them. The engineer sizes the steel, we deal with Angus Council, and our team fits and packs the beam before making good.
Worth knowing before you start
- Standard internal doors come in set widths, so it makes sense to size the opening to suit an off-the-shelf door and lining. Odd sizes need made-to-measure doors and linings, which take longer to arrange.
- Older door surrounds and walls can hide asbestos in textured coatings, insulating board above doors or panelling. In buildings built before 2000 it must be identified before the wall is cut, so a refurbishment survey of the area is arranged where there is a risk.
- When an opening widens, the old threshold strip and floor finishes often stop short. Carpet, boards or tiles need joining neatly across the new width, and a change in floor height between rooms may need a threshold bar or a gentle ramp.
- The main cost factors are whether the wall is structural, the width of the opening, what the support bears onto, how much electrical or heating work has to move, and whether you want new door linings and doors fitted as part of the job.
- In older houses, a doorway may already have a timber lintel that has rotted or a brick arch that is hard to extend. These are replaced rather than added to, and the engineer allows for soft lime mortar and any cracking found once the wall is opened.
How the job runs in Angus
Look and measure
We check the wall, the span you want and what the wall is carrying, and photograph anything the engineer needs to see.
Design and price
Calculations come back from the engineer and we confirm your fixed written price, line by line.
Building warrant
A building warrant is applied for from Angus Council, and work starts only once the warrant has been granted.
Fit, inspect, finish
The work is propped and the steel installed and packed tight. After inspection the opening is boxed, plastered and left clean.
What do wider doorways & openings cost in Angus?
As a guide, budget £910–£2,280 including VAT for widening an internal doorway in Angus, based on published UK cost guides adjusted for prices in Scotland (-9%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Widening an internal doorway | £910–£2,280 | Opening widened with a new lintel or short beam, approval where structural, and making good |
| Lintel replacement | £360–£1,090 per lintel | Propping, removing the old lintel, new lintel set on beds and brickwork made good |
| RSJ supply and fit (single beam) | £730–£2,280 per beam | Beam supplied, delivered, lifted and packed on padstones, with propping (calculations and approval priced separately) |
| Load-bearing wall removal with steel beam | £1,800–£4,550 | Typical internal wall up to about 4 m: calculations, building standards, propping, steel, padstones, fitting, fire protection and making good |
Figures include our approximate regional adjustment for prices in Scotland (-9%) and are rounded. How these figures are worked out.
Approvals in Angus
Scottish rules are stricter on timing than in England: the building warrant must be in place before the wall is touched. We prepare the application with the engineer's calculations and submit it to Angus Council. The finished work is then certified and a completion certificate submitted for acceptance.
Scotland has no Party Wall Act. Work affecting a shared wall is governed by your title deeds and the general law, and in flats by the Tenements (Scotland) Act 2004, so it is sensible to agree the work with neighbours in writing before starting.
Wider doorways & openings by town
Questions about wider doorways & openings in Angus
How long does it take to widen a doorway?
The structural part usually takes one to two working days: propping, cutting the opening, fitting the lintel or beam and packing it. Plastering follows, then a few days of drying before linings are painted or a new door is hung. Building standards inspection fits in once the support is in place.
What is included in the price for a wider doorway?
The itemised written quote lists the survey, any engineer's calculations and building standards fees, propping, cutting the opening, the lintel or steel, linings or plastered reveals, and making good. Moving services, supplying doors and flooring joins appear as separate lines. The price is fixed in writing once the size and finish are agreed.
Do I need building regulations to widen an internal door?
Only if the wall is load-bearing or the change affects fire safety, such as the escape route from upstairs. Widening an opening in a non-structural stud partition usually does not need structural approval. We confirm which applies at the survey, and handle the building standards application or notice where it is needed.
How wide can I make a doorway?
That depends on the wall, what it carries and how much solid wall is left at each side for the support to bear on, and a structural engineer sets the limit. Many people go from a single door to a double-width opening, and beyond that the job starts to become a partial wall removal.