Structural calculations · Caterham
Structural calculations in Caterham
Structural calculations for homes in CR3, CR6, designed by a structural engineer.
- Price fixed in writing once scope is agreed
- Building control arranged
- Temporary works and making good included
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
What structural calculations involve in Caterham
For homes in Caterham and the CR3 and CR6 districts, we handle structural calculations from survey to sign-off. We also work in nearby Crawley, roughly 12.5 miles away. The beam is sized by a structural engineer and inspected before it is boxed in.
Building control will not approve a beam on trust. Before steel goes in, someone has to show in writing what the beam is carrying, what size it needs to be and how its ends are supported. That is the job of structural calculations, prepared by a qualified structural engineer from measurements taken at the property.
Things to plan for
- A load take-down traces every weight that reaches the beam, from roof tiles and snow to upstairs walls, furniture and people. Getting this right matters as much as the beam choice itself, because an underestimated load makes every later check wrong.
- Older buildings take more judgement. Lime mortar, rubble-filled walls, timber bressummers and shallow footings all affect how loads are carried, so engineers working on period properties often allow for weaker materials or ask for more investigation.
- The cost of calculations rises with complexity: the number of beams and columns, whether loads come down from several floors, whether foundations need designing, and how much investigation is needed on site. A single straightforward beam sits at the simpler end.
- A typical calculation pack covers the loads assumed, the beam section chosen, checks for bending, shear and deflection, the bearing and padstone design, and any column or foundation design. It is usually accompanied by a drawing or sketch showing positions.
- Accurate site information is essential. The engineer needs real spans, joist directions, wall build-ups and what sits above, so a site visit or detailed survey usually comes before any calculations. Guesswork from estate agent floor plans is not enough.
What happens, step by step
Free visit
A short visit to Caterham to see the job, agree what you want and check the bearings, floors and services that affect the design.
Calculations
The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Steel in, made good
On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.
What do structural calculations cost in Caterham?
As a guide, budget £280–£840 including VAT for structural calculations for a beam in Caterham, based on published UK cost guides adjusted for prices in the South East (+12%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Structural calculations for a beam | £280–£840 | Site measure or photos, beam and padstone design and calculations for building control |
| Load-bearing wall removal with steel beam | £2,250–£5,600 | Typical internal wall up to about 4 m: calculations, building control, propping, steel, padstones, fitting, fire protection and making good |
| Building control fees | £280–£730 | Building notice or full plans fee and inspections; varies by council or approver |
| RSJ supply and fit (single beam) | £900–£2,800 per beam | Beam supplied, delivered, lifted and packed on padstones, with propping (calculations and approval priced separately) |
Figures include our approximate regional adjustment for prices in the South East (+12%) and are rounded. How these figures are worked out.
Building control and neighbours in Caterham
Structural openings in English homes need building regulations approval before work starts. The local council's building control team can deal with it, or you can use a registered building control approver. Either way the steel is inspected before it is covered, and a completion certificate is issued at the end. Keep it safe for when you sell.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Local questions answered
Can I stay at home while the work is done in Caterham?
Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.
Do you cover Caterham for structural calculations?
Yes. We carry out structural calculations in Caterham and the CR3 and CR6 postcode districts. Book a free survey visit and we will check the wall, arrange the engineer's calculations and send an itemised written quote.
Can I use calculations from my architect or previous builder?
Yes, as long as they match what is actually being built. We check the spans, loads and bearing details against the layout and the site before ordering steel. If the plans have changed since the calculations were done, or the site differs from what was assumed, the engineer needs to update them first.
What is a load take-down?
A load take-down is the part of the calculations that adds up every load reaching a beam or column and follows it down to the ground. It includes the roof, floors, walls, people, furniture and, where relevant, snow and wind. Each element along that path is then checked to make sure it can carry its share.
Does the engineer need to visit my house?
Usually, yes, or at least work from a detailed survey of the property. The engineer needs accurate spans, joist directions, wall construction and an understanding of what sits above the opening. Calculations based only on a floor plan or photos risk missing loads, which can lead to redesign once work starts.