Steel BeamInstallers
Pocket cut into a brick party wall to take the end of a steel beam on a padstone

Party wall beam works · Faversham

Party wall beam works in Faversham

Steelwork, approvals and making good for party wall beam works in Faversham and nearby.

  • Survey, design and installation in one
  • Covering ME13
  • Inspected before it is covered

Free survey in Faversham

Tell us about the party wall beam work job in Faversham.

Please enter your name.
Please enter a UK phone number.
Please enter a valid email.
Please enter a UK postcode.
Please tell us a little about the job.
  • Free survey visit
  • Engineer's calculations arranged
  • Building control handled
  • Fixed written price once scope is agreed
  • England, Wales, mainland Scotland & NI

What party wall beam works involve in Faversham

Faversham has a mix of housing, and party wall beam works need a slightly different approach in each. The wider Kent area is covered as well. Whatever the age of the property, the steel goes in on proper bearings with temporary support in place throughout.

In terraced and semi-detached homes, the most obvious place for a new beam to bear is often the wall you share with next door. That wall belongs partly to your neighbour, so in England and Wales the law sets out a process for telling them, recording the condition of their side and settling any disagreement before the steel goes in.

Key points for your project

  • A party structure notice must be served at least two months before the work starts. That lead time is easy to overlook, so we build it into the programme from the first visit rather than discovering it when the steel is ready.
  • Keep the notices, any written consent, the schedule of condition and the award with your building control certificate. A buyer's solicitor may ask whether party wall procedures were followed, and these documents answer that. For legal questions, a solicitor or the surveyor is the right adviser.
  • Cutting a pocket into a shared wall needs care, because the wall also supports the neighbour's floors and roof. The engineer specifies how the pocket is formed and packed, and props or needles may be needed to keep both houses supported while it is cut.
  • The party wall award is the document the surveyors produce to settle the dispute. It sets out the work allowed, working hours and methods, access arrangements and how any damage will be dealt with, and both owners are bound by it unless it is appealed.
  • A schedule of condition records the neighbour's side of the wall before work begins, usually with written notes and photographs of existing cracks and finishes. It gives both sides a fair reference point if anyone later claims the work caused damage.

How the job runs in Faversham

  1. Look and measure

    We check the wall, the span you want and what the wall is carrying, and photograph anything the engineer needs to see.

  2. Design and price

    Calculations come back from the engineer and we confirm your fixed written price, line by line.

  3. Building control

    We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.

  4. Fit, inspect, finish

    The work is propped and the steel installed and packed tight. After inspection the opening is boxed, plastered and left clean.

What do party wall beam works cost in Faversham?

As a guide, budget £1,000–£2,250 per neighbour including VAT for party wall surveyor (agreed surveyor, per neighbour) in Faversham, based on published UK cost guides adjusted for prices in the South East (+12%).

JobTypical guide rangeWhat it usually covers
Party wall surveyor (agreed surveyor, per neighbour)£1,000–£2,250 per neighbourSchedule of condition and award where a neighbour dissents; serving notice alone, where the neighbour consents, costs far less (England and Wales only)
Building control fees£280–£730Building notice or full plans fee and inspections; varies by council or approver
Through-lounge knock-through£2,800–£6,150Wall between front and back reception rooms, steel beam, approvals, plastering and floor infill
Structural calculations for a beam£280–£840Site measure or photos, beam and padstone design and calculations for building control

Figures include our approximate regional adjustment for prices in the South East (+12%) and are rounded. How these figures are worked out.

Approvals in Faversham

Structural openings in English homes need building regulations approval before work starts. The local council's building control team can deal with it, or you can use a registered building control approver. Either way the steel is inspected before it is covered, and a completion certificate is issued at the end. Keep it safe for when you sell.

Terraced and semi-detached homes often need party wall notices, because cutting into a shared wall to take a beam end is notifiable under the Party Wall etc. Act 1996. Allow at least two months for the notice period unless your neighbour agrees sooner.

Building rules in England

Party wall beam works near Faversham

Party wall beam works in Faversham: your questions

Can I stay at home while the work is done in Faversham?

Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.

Can you work on older or listed homes in Faversham?

Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.

What happens if my neighbour dissents?

A dissent means surveyors are appointed to settle how the work goes ahead; it does not mean the work is refused. The owners either agree on one surveyor or appoint one each. The surveyors usually prepare a schedule of condition of the neighbour's property and publish an award setting out how and when the beam can be fitted.

What is a schedule of condition?

A schedule of condition is a written and photographic record of the neighbour's property, focused on the rooms next to the party wall, made before work starts. It notes existing cracks, stains and finishes. If damage is alleged later, the surveyors compare the property with the schedule to see what changed during the work.

What if work starts without serving a party wall notice?

The neighbour can seek a court injunction to stop the work until the proper procedure is followed, and starting without notice weakens the building owner's position if damage is later disputed. It can also cause problems when either property is sold. We do not start notifiable party wall work until the notice process is complete.

Planning to take a wall out?

Book a free survey visit. You get an itemised written quote covering calculations, building control, steel and making good.