Party wall beam works · Exeter
Party wall beam works in Exeter
Party wall beam works for homes in EX1, EX2, EX4, designed by a structural engineer.
- Price fixed in writing once scope is agreed
- Building control arranged
- Temporary works and making good included
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
What party wall beam works involve in Exeter
For homes in Exeter and the EX1, EX2 and EX4 districts, we handle party wall beam works from survey to sign-off. The wider Devon area is covered as well. The beam is sized by a structural engineer and inspected before it is boxed in.
In terraced and semi-detached homes, the most obvious place for a new beam to bear is often the wall you share with next door. That wall belongs partly to your neighbour, so in England and Wales the law sets out a process for telling them, recording the condition of their side and settling any disagreement before the steel goes in.
Things to plan for
- Cutting a pocket into a shared wall needs care, because the wall also supports the neighbour's floors and roof. The engineer specifies how the pocket is formed and packed, and props or needles may be needed to keep both houses supported while it is cut.
- Surveyors' fees under the Act are normally the responsibility of whoever is having the work done. Costs rise with the number of adjoining owners, whether each appoints their own surveyor, and how much checking the beam design and method need.
- A schedule of condition records the neighbour's side of the wall before work begins, usually with written notes and photographs of existing cracks and finishes. It gives both sides a fair reference point if anyone later claims the work caused damage.
- The party wall award is the document the surveyors produce to settle the dispute. It sets out the work allowed, working hours and methods, access arrangements and how any damage will be dealt with, and both owners are bound by it unless it is appealed.
- Party walls in older terraces are often solid brick with lime mortar, and may carry both houses' chimney flues. The engineer checks the wall's condition and thickness where the beam will bear, and the bearing position may be adjusted to avoid flues still in use.
Four stages, one team
Look and measure
We check the wall, the span you want and what the wall is carrying, and photograph anything the engineer needs to see.
Design and price
Calculations come back from the engineer and we confirm your fixed written price, line by line.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Fit, inspect, finish
The work is propped and the steel installed and packed tight. After inspection the opening is boxed, plastered and left clean.
What do party wall beam works cost in Exeter?
As a guide, budget £930–£2,060 per neighbour including VAT for party wall surveyor (agreed surveyor, per neighbour) in Exeter, based on published UK cost guides adjusted for prices in the South West (+3%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Party wall surveyor (agreed surveyor, per neighbour) | £930–£2,060 per neighbour | Schedule of condition and award where a neighbour dissents; serving notice alone, where the neighbour consents, costs far less (England and Wales only) |
| Through-lounge knock-through | £2,600–£5,650 | Wall between front and back reception rooms, steel beam, approvals, plastering and floor infill |
| Building control fees | £260–£670 | Building notice or full plans fee and inspections; varies by council or approver |
| Structural calculations for a beam | £260–£770 | Site measure or photos, beam and padstone design and calculations for building control |
Figures include our approximate regional adjustment for prices in the South West (+3%) and are rounded. How these figures are worked out.
Building rules for Exeter
In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either the local council's building control team or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Questions about party wall beam works in Exeter
What happens at the survey visit in Exeter?
We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.
Can you work on older or listed homes in Exeter?
Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.
Can my neighbour stop me putting a beam in the party wall?
Generally no. The Party Wall etc. Act 1996 gives the building owner the right to carry out notifiable work, such as cutting in a beam bearing, provided the proper procedure is followed. A neighbour can dissent, which leads to surveyors setting conditions in an award, but this regulates the work rather than preventing it. Take legal advice on specific disputes.
Do I need a party wall agreement to put a steel beam in?
Yes, in England and Wales, if the beam will bear into a wall you share with a neighbour. Notice is required under the Party Wall etc. Act 1996, and the neighbour may consent in writing or dissent, in which case surveyors produce a party wall award. Scotland and Northern Ireland have no equivalent Act.
What happens if my neighbour dissents?
A dissent means surveyors are appointed to settle how the work goes ahead; it does not mean the work is refused. The owners either agree on one surveyor or appoint one each. The surveyors usually prepare a schedule of condition of the neighbour's property and publish an award setting out how and when the beam can be fitted.