Steel BeamInstallers
Brickwork propped above a window while a cracked lintel is replaced

Lintel replacement · Jarrow

Lintel replacement in Jarrow

Steelwork, approvals and making good for lintel replacement in Jarrow and nearby.

  • Itemised written quote
  • Beam sized by a structural engineer
  • Covering Jarrow and nearby

Free survey in Jarrow

Tell us about the lintel replacement job in Jarrow.

Please enter your name.
Please enter a UK phone number.
Please enter a valid email.
Please enter a UK postcode.
Please tell us a little about the job.
  • Free survey visit
  • Engineer's calculations arranged
  • Building control handled
  • Fixed written price once scope is agreed
  • England, Wales, mainland Scotland & NI

About our lintel replacement service in Jarrow

Planning lintel replacement in Jarrow? Our team covers NE31, NE32, NE33, NE34 and NE35 and the streets around them. It sits about 5.2 miles from Newcastle upon Tyne, which we also cover. You get one written quote for the calculations, approvals, propping, steel and making good.

A lintel is the short beam that carries the brickwork over a window or door. When it fails, the signs tend to show outside first: a crack stepping up from the corner of the frame, a dip in the brick courses, or a window that has started to bind. Timber, concrete and old steel lintels each fail in their own way, but the fix follows the same principle.

Worth knowing before you start

  • Replacing a structural lintel is generally treated as building work, so approval is in place before it starts. In England, Wales and Northern Ireland that means building control, and in Scotland a building warrant is needed before structural work begins.
  • Diagonal cracks that start at the top corners of a window and step up through the mortar joints are a classic sign of a lintel problem. Movement elsewhere in a house can cause similar cracks, so the cause is confirmed on site before anything is replaced.
  • In cavity walls, a cavity tray and weep vents above the lintel send any water in the cavity back outside. Missing trays are a frequent cause of damp patches above window heads, so they are fitted as part of the replacement.
  • Concrete lintels fail when the steel reinforcement inside rusts and swells, pushing off the concrete face. Rust staining, flaking edges and exposed bars are the warning signs, and once that process is well under way an engineer will often recommend replacement over patching.
  • A typical single lintel takes a day or two on site. Keep the building control completion certificate with your property papers, because buyers' surveyors often notice old cracking around openings and their solicitors will ask what was done about it.

What happens, step by step

  1. Free visit

    A short visit to Jarrow to see the job, agree what you want and check the bearings, floors and services that affect the design.

  2. Calculations

    The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.

  3. Building control

    We submit a building notice or full plans application to South Tyneside Council, so approval is in place before the wall is touched.

  4. Steel in, made good

    On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.

What does lintel replacement cost in Jarrow?

As a guide, budget £370–£1,120 per lintel including VAT for lintel replacement in Jarrow, based on published UK cost guides adjusted for prices in the North East (-7%).

JobTypical guide rangeWhat it usually covers
Lintel replacement£370–£1,120 per lintelPropping, removing the old lintel, new lintel set on beds and brickwork made good
Rear wall opening for bi-fold or sliding doors£2,300–£6,500External wall opened up to about 5 m with steel, propping, cavity tray and making good (doors supplied separately)
Widening an internal doorway£930–£2,320Opening widened with a new lintel or short beam, approval where structural, and making good
Structural calculations for a beam£230–£700Site measure or photos, beam and padstone design and calculations for building control

Figures include our approximate regional adjustment for prices in the North East (-7%) and are rounded. How these figures are worked out.

Building rules for Jarrow

In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either South Tyneside Council or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.

If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.

Building rules in England

Lintel replacement near Jarrow

Lintel replacement in Jarrow: your questions

Who approves lintel replacement in Jarrow?

Structural work in Jarrow needs a building notice or full plans application to South Tyneside Council or a registered building control approver. We prepare and submit it with the structural engineer's calculations and arrange the inspections, so the completion paperwork follows the job.

Can I stay at home while the work is done in Jarrow?

Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.

Can a timber lintel in an old house be replaced with steel or concrete?

Yes, where the engineer is satisfied it suits the wall. Timber lintels in older solid-walled homes are often swapped for a steel or concrete alternative that will not rot. The engineer considers how the wall is built, and where lime mortar is present the rebuild uses a compatible mortar.

Can a lintel be replaced without removing the window?

Often, yes. The brickwork above is propped, the old lintel is taken out and the new one fitted while the frame stays in place under protection. If the frame has been carrying weight because the old lintel sagged, it may need easing or adjusting once the new lintel is in.

How do I know if my lintel needs replacing?

Look for diagonal cracks rising from the top corners of a window or door, brick courses that dip over the opening, rust staining or flaking on a concrete lintel, and frames that have started to stick. Any of these is worth having checked, as the cause needs confirming on site before a replacement is planned.

Can you work on older or listed homes in Jarrow?

Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.

Planning to take a wall out?

Book a free survey visit. You get an itemised written quote covering calculations, building control, steel and making good.