Garage conversion openings · Putney
Garage conversion openings in Putney
Garage conversion openings for homes in SW6, SW10, SW11, designed by a structural engineer.
- Price fixed in writing once scope is agreed
- Building control arranged
- Temporary works and making good included
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
What garage conversion openings involve in Putney
Planning garage conversion openings in Putney? Our team covers SW6, SW10, SW11, SW13 and SW14 and the streets around them. We also cover the surrounding towns and villages in London. You get one written quote for the calculations, approvals, propping, steel and making good.
Converting a garage is a popular way to add a room without extending. Structurally, two things usually happen: the big garage door opening is filled in with a wall, window or door on proper foundations, and a doorway or wider opening is formed through the wall between the garage and the house.
Worth knowing before you start
- Garage floors often sit lower than the house floor and may have no damp-proof membrane. The infill wall needs a damp-proof course linked to the existing walls, and the floor usually needs a membrane, insulation and screed raised to the house level.
- A converted garage used as a bedroom needs a suitable means of escape, often an escape window, and every habitable room needs ventilation. These affect the size and type of window in the infill wall, so they are agreed before brickwork starts.
- The beam or lintel over a garage door was designed to span an open gap. It may be timber, concrete or steel, and in older houses it can be undersized or corroded, so the engineer checks it before anything is built underneath or above it.
- With an integral garage, the room above usually has its front wall sitting on the beam over the garage door. Any sag or rust in that beam matters more because it carries a wall and floor, and replacing it means propping the upstairs while new steel goes in.
- The infill wall facing the street is the part everyone sees. Bricks and mortar are matched to the house as closely as possible, or the panel is rendered or clad, and the new window is aligned with the others on the front elevation.
What happens, step by step
Free visit
A short visit to Putney to see the job, agree what you want and check the bearings, floors and services that affect the design.
Calculations
The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Steel in, made good
On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.
Guide prices for garage conversion openings in Putney
As a guide, budget £1,300–£3,850 including VAT for garage door opening infill (structural part) in Putney, based on published UK cost guides adjusted for London prices (+28%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Garage door opening infill (structural part) | £1,300–£3,850 | Beam or lintel checked or replaced, foundation and infill wall for the old door opening (window and finishes extra) |
| Lintel replacement | £510–£1,540 per lintel | Propping, removing the old lintel, new lintel set on beds and brickwork made good |
| Widening an internal doorway | £1,300–£3,200 | Opening widened with a new lintel or short beam, approval where structural, and making good |
| Structural calculations for a beam | £320–£960 | Site measure or photos, beam and padstone design and calculations for building control |
Figures include our approximate regional adjustment for London prices (+28%) and are rounded. How these figures are worked out.
Building rules for Putney
In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either the local council's building control team or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Local questions answered
Do you cover Putney for garage conversion openings?
Yes. We carry out garage conversion openings in Putney and the SW6, SW10, SW11, SW13 and SW14 postcode districts. Book a free survey visit and we will check the wall, arrange the engineer's calculations and send an itemised written quote.
Do you also work near Putney?
Yes. We also cover nearby towns including Barnes, Fulham, Wimbledon and Chiswick.
Can I knock through from my garage into the kitchen?
Usually, yes. The wall between an attached or integral garage and the house is often load-bearing, so the opening needs a lintel or steel beam designed by a structural engineer and approved by building control. If any of the garage stays as storage, the opening needs fire separation, such as a fire door.
Do I need a steel beam for a garage conversion?
Not always. If the existing beam over the garage door is sound and the infill wall sits on its own foundation, new steel may not be needed. Steel is usually required when forming an opening through a load-bearing wall into the house, or when the garage door beam is undersized or corroded. The engineer decides.
What paperwork will I get when the conversion is done?
You should receive the engineer's calculations, a building control completion certificate for the conversion, and certificates for any electrical or gas work. Keep these together, as buyers' solicitors ask for evidence that a garage conversion was approved, especially where a garage has become a bedroom or living space.
Do I need a party wall agreement for garage conversion openings in Putney?
Yes, if the beam bears into a shared wall: the Party Wall etc. Act 1996 applies in England and Wales, and a party structure notice must be served at least two months before that work starts. We arrange it through a party wall surveyor.