Flat & HMO conversion steels · Edinburgh
Flat & HMO conversion steels in Edinburgh
Calculations, approvals, propping, steel and making good for flat & HMO conversion steels across Edinburgh.
- Price fixed in writing once scope is agreed
- Building warrant arranged
- Temporary works and making good included
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Flat & HMO conversion steels in Edinburgh: how it works
Flat and HMO conversion steels are the beams, columns and frames needed when a house or building is reworked into self-contained flats or a house in multiple occupation. New layouts move walls, stairs and bathrooms, so steel picks up the loads that old walls used to carry, designed to work alongside the fire separation and sound insulation the conversion also needs.
Across Edinburgh, flat & HMO conversion steels usually come up when people want more light, a better layout or a way through to a new extension. We cover the city and its surrounding districts. Whatever the reason, the beam is sized from calculations and the work is inspected before anything is covered.
What to expect
- Converting a house into flats is treated as a material change of use for building regulations purposes, so fire safety, sound insulation and other requirements apply across the building, not just to the structural work. The steelwork forms one part of that wider approval.
- Where the building is leasehold, or an existing flat is being altered, the freeholder's written consent is normally needed for structural changes. Lenders may also want to see building standards sign-off before releasing funds on a converted property.
- Floors and walls between flats must resist the spread of fire, and steel holding up those floors needs protection to match. Where a beam passes through a separating wall or floor, the gaps around it are fire-stopped so the separation stays continuous.
- Conversions add kitchens and bathrooms upstairs, so soil pipes, water supplies and extract ducts need routes through the structure. Steel and joist positions are coordinated with these runs, and steel should never be drilled or notched on site without the engineer's approval.
- In a conversion, walls that carried load are often taken out to form open kitchens or wider corridors, while new partitions go in elsewhere. Each change is checked, because a new stud wall standing on old joists can add load the floor was never designed for.
From survey to sign-off in Edinburgh
Survey in Edinburgh
We visit, look at the wall and what sits above it, measure the opening and note services, access and how the steel can be brought in.
Engineer's design
A structural engineer sizes the beam, padstones and any posts, and sets out the temporary support needed while the wall is out.
Building warrant
A building warrant is applied for from City of Edinburgh Council, and work starts only once the warrant has been granted.
Install and sign-off
Props go in, the opening is formed, the steel is set and packed, building standards inspects it, and we make good.
What do flat & HMO conversion steels cost in Edinburgh?
As a guide, budget £2,300–£8,200 including VAT for steelwork for a flat or HMO conversion in Edinburgh, based on published UK cost guides adjusted for prices in Scotland (-9%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Steelwork for a flat or HMO conversion | £2,300–£8,200 | Beams and posts for a revised layout, with approvals; fire and sound separation priced with the conversion |
| Fire protection to a steel beam | £140–£550 per beam | Fire-rated board boxing or an intumescent coating system as specified |
| Load-bearing wall removal with steel beam | £1,800–£4,550 | Typical internal wall up to about 4 m: calculations, building standards, propping, steel, padstones, fitting, fire protection and making good |
| Loft conversion steels | £2,300–£5,450 | Supply and fit of floor and ridge steels on padstones, including lifting into the roof space |
Figures include our approximate regional adjustment for prices in Scotland (-9%) and are rounded. How these figures are worked out.
Building control and neighbours in Edinburgh
Scottish rules are stricter on timing than in England: the building warrant must be in place before the wall is touched. We prepare the application with the engineer's calculations and submit it to City of Edinburgh Council. The finished work is then certified and a completion certificate submitted for acceptance.
There is no party wall notice system in Scotland. Instead, check your title deeds and, for flats, the tenement management scheme, and talk to neighbours early if the beam bears into a shared wall.
More in Edinburgh
Questions about flat & HMO conversion steels in Edinburgh
Who approves flat & HMO conversion steels in Edinburgh?
Structural work in Edinburgh needs a building warrant from City of Edinburgh Council, granted before work starts. We prepare and submit it with the structural engineer's calculations and arrange the inspections, so the completion paperwork follows the job.
Do you cover Edinburgh for flat & HMO conversion steels?
Yes. We carry out flat & HMO conversion steels in Edinburgh. Book a free survey visit and we will check the wall, arrange the engineer's calculations and send an itemised written quote.
Do I need an HMO licence before converting a house?
Possibly. Many HMOs need a licence from the local council, and some areas license smaller HMOs too. Licensing covers room sizes, amenities and fire safety, and it is separate from planning and building regulations. Check the council's requirements early, as they can affect the layout and therefore the steelwork needed.
How long does the steelwork take on a house-to-flats conversion?
Typically one to three weeks on site, depending on how many walls move and how the work is phased. The steel is usually among the first structural stages, so it is programmed early to let partitions, services and fire separation follow. The full conversion takes considerably longer than the steelwork alone.
Does steel in a flat conversion need fire protection?
Yes, in almost all cases. Steel holding up floors that separate flats, or supporting escape routes, needs fire resistance to the period the scheme requires, which can be higher than in a single house. It is usually boxed with fire-rated board or coated with intumescent paint, and building standards inspects it before handover.
Do I need freeholder consent to put a steel beam in my flat?
Usually, yes. If you own a leasehold flat, structural alterations normally need the freeholder's or landlord's written consent under the lease. In Scotland, the title deeds and the Tenements (Scotland) Act 2004 govern work affecting shared parts of the building. We can provide the calculations and drawings needed to support a consent request.
How much do flat & HMO conversion steels cost in Edinburgh?
As a guide, budget £2,300–£8,200 including VAT for steelwork for a flat or HMO conversion in Edinburgh, based on published UK cost guides adjusted for prices in Scotland (-9%). The exact figure depends on the span, what the wall carries, access and the finish, and is fixed in writing once the scope is agreed.