Flat & HMO conversion steels · Peterhead
Flat & HMO conversion steels in Peterhead
Steelwork, approvals and making good for flat & HMO conversion steels in Peterhead and nearby.
- Survey, design and installation in one
- Covering AB42
- Inspected before it is covered
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Flat & HMO conversion steels in Peterhead: how it works
If you live in Peterhead, flat & HMO conversion steels can usually be planned and priced after a single survey visit. We also cover the surrounding towns and villages in Aberdeenshire. We cover AB42, and we fix the price in writing once the layout and scope are agreed.
Turning a large house into flats or an HMO rarely leaves every wall where it was. Rooms are split and joined, kitchens and bathrooms appear on upper floors, and new stairs or corridors are formed. Each time a load-bearing wall moves, steel usually takes its place, and it has to suit the fire and sound standards of a building shared by several households.
Worth knowing before you start
- Where the building is leasehold, or an existing flat is being altered, the freeholder's written consent is normally needed for structural changes. Lenders may also want to see building standards sign-off before releasing funds on a converted property.
- Floors and walls between flats must resist the spread of fire, and steel holding up those floors needs protection to match. Where a beam passes through a separating wall or floor, the gaps around it are fire-stopped so the separation stays continuous.
- Conversions add kitchens and bathrooms upstairs, so soil pipes, water supplies and extract ducts need routes through the structure. Steel and joist positions are coordinated with these runs, and steel should never be drilled or notched on site without the engineer's approval.
- Costs reflect how many walls move, the number of beams and columns, access for lifting steel to upper floors, the fire period required, phasing around other trades and whether existing foundations can take the new concentrated loads.
- In a conversion, walls that carried load are often taken out to form open kitchens or wider corridors, while new partitions go in elsewhere. Each change is checked, because a new stud wall standing on old joists can add load the floor was never designed for.
What happens, step by step
Free visit
A short visit to Peterhead to see the job, agree what you want and check the bearings, floors and services that affect the design.
Calculations
The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.
Building warrant
A building warrant is applied for from Aberdeenshire Council, and work starts only once the warrant has been granted.
Steel in, made good
On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.
How much should I budget in Peterhead?
As a guide, budget £2,300–£8,200 including VAT for steelwork for a flat or HMO conversion in Peterhead, based on published UK cost guides adjusted for prices in Scotland (-9%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Steelwork for a flat or HMO conversion | £2,300–£8,200 | Beams and posts for a revised layout, with approvals; fire and sound separation priced with the conversion |
| Building warrant fee | £215–£435 | Statutory fee set by the estimated value of the work: £215 up to £5,000, rising on a sliding scale (fees from 1 April 2026) |
| Fire protection to a steel beam | £140–£550 per beam | Fire-rated board boxing or an intumescent coating system as specified |
| Structural calculations for a beam | £230–£680 | Site measure or photos, beam and padstone design and calculations for building standards |
Figures include our approximate regional adjustment for prices in Scotland (-9%) and are rounded. How these figures are worked out.
Building rules for Peterhead
Scottish rules are stricter on timing than in England: the building warrant must be in place before the wall is touched. We prepare the application with the engineer's calculations and submit it to Aberdeenshire Council. The finished work is then certified and a completion certificate submitted for acceptance.
There is no party wall notice system in Scotland. Instead, check your title deeds and, for flats, the tenement management scheme, and talk to neighbours early if the beam bears into a shared wall.
Flat & HMO conversion steels near Peterhead
- Ellon 14.5 mi
- Fraserburgh 15.3 mi
Local questions answered
Do you also work near Peterhead?
Yes. We also cover nearby towns including Ellon and Fraserburgh.
How much do flat & HMO conversion steels cost in Peterhead?
As a guide, budget £2,300–£8,200 including VAT for steelwork for a flat or HMO conversion in Peterhead, based on published UK cost guides adjusted for prices in Scotland (-9%). The exact figure depends on the span, what the wall carries, access and the finish, and is fixed in writing once the scope is agreed.
What steel beams are needed for a flat conversion?
It depends on how much the layout changes. Typical steelwork includes beams where load-bearing walls are removed, trimmers around new stair openings, and columns or frames where loads have to come down through the building. A structural engineer designs each element from the new layout and the existing structure, and the calculations go to building standards.
How long does the steelwork take on a house-to-flats conversion?
Typically one to three weeks on site, depending on how many walls move and how the work is phased. The steel is usually among the first structural stages, so it is programmed early to let partitions, services and fire separation follow. The full conversion takes considerably longer than the steelwork alone.
Can you install the steel while my main contractor runs the conversion?
Yes. On many conversions the steelwork is installed as a package within a wider build, working to the main contractor's programme and the engineer's design. We coordinate propping, deliveries and building standards inspections for the steel so the other trades can follow on smoothly once it is in.