Steel BeamInstallers
Rear wall opened for wide doors with a galvanised steel beam and props, garden beyond

Bi-fold & sliding door openings · Fermanagh and Omagh

Bi-fold & sliding door openings in Fermanagh and Omagh

Survey, engineer's design and installation of bi-fold & sliding door openings anywhere in Fermanagh and Omagh.

  • Price fixed in writing once scope is agreed
  • Building control arranged
  • Temporary works and making good included

Free survey in Fermanagh and Omagh

Tell us about your bi-fold & sliding door openings project in Fermanagh and Omagh.

Please enter your name.
Please enter a UK phone number.
Please enter a valid email.
Please enter a UK postcode.
Please tell us a little about the job.
  • Free survey visit
  • Engineer's calculations arranged
  • Building control handled
  • Fixed written price once scope is agreed
  • England, Wales, mainland Scotland & NI

Bi-fold & sliding door openings in Fermanagh and Omagh: how it works

Bi-fold and sliding door openings are wide gaps formed in an external wall, usually at the back of the house, to take a run of folding or sliding glazed doors. A steel beam carries the wall, floor and roof loads above, and it is designed stiff enough that its movement does not press on the glass or stop the doors running.

Homes across Fermanagh and Omagh range from Victorian terraces to post-war semis and newer estates, and bi-fold & sliding door openings look different in each. We can survey in places such as Omagh and Enniskillen and the villages around them. We plan the steel, the temporary support and the approvals around the building, then fix the price in writing once the scope is agreed.

What to expect

  • In cavity walls a cavity tray above the new head directs any water in the cavity out through weep vents. Without it, damp can show inside above the doors, so the tray is lapped and sealed correctly as the brickwork is rebuilt.
  • New glazed doors must meet the energy efficiency requirements of the building regulations, and a wide opening adds a large area of glazing to the house. The door supplier normally provides the performance data that building control needs.
  • Replacing a rear window with doors in a house is usually permitted development, but front elevations, listed buildings, flats and homes where permitted development rights have been removed may need planning permission or another consent.
  • The house is open to the weather between taking out the wall and fitting the doors. Temporary sheeting or a boarded frame keeps rain out and the house secure, so the gap between the structural work and door fitting should be kept short.
  • Glazed doors need a stiffer beam than a plain opening of the same width. If the steel bends even slightly under load, folding panels can bind, sliders can stick and glass can be stressed, so the engineer sets a tighter deflection limit for door openings.

What happens, step by step

  1. Look and measure

    We check the wall, the span you want and what the wall is carrying, and photograph anything the engineer needs to see.

  2. Design and price

    Calculations come back from the engineer and we confirm your fixed written price, line by line.

  3. Building control

    A full plans application or building notice goes to Fermanagh and Omagh District Council under the Building Regulations (Northern Ireland) 2012 before work begins.

  4. Fit, inspect, finish

    The work is propped and the steel installed and packed tight. After inspection the opening is boxed, plastered and left clean.

What do bi-fold & sliding door openings cost in Fermanagh and Omagh?

As a guide, budget £2,150–£6,000 including VAT for rear wall opening for bi-fold or sliding doors in Fermanagh and Omagh, based on published UK cost guides adjusted for prices in Northern Ireland (-14%).

JobTypical guide rangeWhat it usually covers
Rear wall opening for bi-fold or sliding doors£2,150–£6,000External wall opened up to about 5 m with steel, propping, cavity tray and making good (doors supplied separately)
Lintel replacement£340–£1,030 per lintelPropping, removing the old lintel, new lintel set on beds and brickwork made good
Opening into a rear extension£2,150–£6,000Original rear wall removed with a beam or goalpost, approvals and propping, coordinated with the extension build
Structural calculations for a beam£220–£640Site measure or photos, beam and padstone design and calculations for building control

Figures include our approximate regional adjustment for prices in Northern Ireland (-14%) and are rounded. How these figures are worked out.

Building rules for Fermanagh and Omagh

In Northern Ireland, structural work comes under the Building Regulations (Northern Ireland) 2012 and is approved by the local council's building control. For Fermanagh and Omagh that is Fermanagh and Omagh District Council. We submit a full plans application or building notice before work starts and book the inspections.

Northern Ireland has no Party Wall Act, so there is no statutory notice to serve. Where the steel bears into a shared wall, the title deeds and the general law apply, and agreeing the work with your neighbour in writing first is good practice.

Building rules in Northern Ireland

Bi-fold & sliding door openings by town

Local questions answered

How much do bi-fold & sliding door openings cost in Fermanagh and Omagh?

As a guide, budget £2,150–£6,000 including VAT for rear wall opening for bi-fold or sliding doors in Fermanagh and Omagh, based on published UK cost guides adjusted for prices in Northern Ireland (-14%). The exact figure depends on the span, what the wall carries, access and the finish, and is fixed in writing once the scope is agreed.

Can I stay at home while the work is done in Fermanagh and Omagh?

Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.

Do I need planning permission for bi-fold doors?

Usually not for a rear opening in a house, as this generally falls within permitted development. Planning or another consent may be needed for front elevations, flats, listed buildings, conservation areas with extra controls, or homes where permitted development rights have been removed. We flag this at survey so you can check before work is booked.

Can I have a level threshold with bi-fold doors?

Often yes, but it has to be designed. The inside floor, outside paving and drainage all need to work together so water cannot run in, usually with a drainage channel outside and the right damp-proof detail under the door frame. We look at levels at the survey and plan the threshold with the door supplier.

What does a bi-fold opening quote include?

Our itemised written quote covers the survey, calculations, building control, propping, removing the wall, steel and padstones, outer leaf support, cavity trays and closers, temporary weather protection and making good. Doors, threshold drainage and patio work are shown separately unless agreed. The price is fixed in writing once the opening size and specification are agreed.

Will the house be open to the weather while the wall is out?

Only briefly, and it is protected throughout. Once the wall is out, the opening is sheeted or boarded so it stays weathertight and secure until the doors arrive. Timing the structural work close to the door delivery date keeps that period as short as possible.

Planning to take a wall out?

Book a free survey visit. You get an itemised written quote covering calculations, building control, steel and making good.