Cambridgeshire · England
Steel beam installers in Cambridge
RSJs and steel beams for homes and businesses in Cambridge, with calculations, approvals, propping and making good.
- Itemised written quote
- Beam sized by a structural engineer
- Covering Cambridge and nearby
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Steel beam work in Cambridge
If you are in Cambridge or the CB2 and CB4 districts, we can survey, design and install the steel for your opening. The wider Cambridgeshire area is covered as well. One team handles the approvals, the propping, the beam and the finish.
Approval in Cambridge is through council building control or a registered building control approver, and party wall notices apply where steel bears into a shared wall.
Services in Cambridge
Wall removal & knock-throughs
- Load-bearing wall removal
- Kitchen-diner knock-throughs
- Through-lounge knock-throughs
- Chimney breast removal
New & wider openings
- Wider doorways & openings
- Bi-fold & sliding door openings
- Garage conversion openings
- Lintel replacement
Extensions, lofts & basements
Beams, frames & columns
Design & approvals
- Structural calculations
- Building control sign-off
- Party wall beam works
- Fire protection for steel beams
Site works & commercial
Four stages, one team
Free visit
A short visit to Cambridge to see the job, agree what you want and check the bearings, floors and services that affect the design.
Calculations
The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Steel in, made good
On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.
Guide prices in Cambridge
As a guide, budget £2,100–£5,300 including VAT for load-bearing wall removal with steel beam in Cambridge, based on published UK cost guides adjusted for prices in the East of England (+6%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Load-bearing wall removal with steel beam | £2,100–£5,300 | Typical internal wall up to about 4 m: calculations, building control, propping, steel, padstones, fitting, fire protection and making good |
| Chimney breast removal (ground floor) | £1,600–£3,200 | Ground-floor breast removed, steel to support the breast above, building control and making good |
| Rear wall opening for bi-fold or sliding doors | £2,650–£7,400 | External wall opened up to about 5 m with steel, propping, cavity tray and making good (doors supplied separately) |
| Loft conversion steels | £2,650–£6,350 | Supply and fit of floor and ridge steels on padstones, including lifting into the roof space |
| Structural calculations for a beam | £260–£800 | Site measure or photos, beam and padstone design and calculations for building control |
Figures include our approximate regional adjustment for prices in the East of England (+6%) and are rounded. How these figures are worked out.
Building rules in Cambridge
In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either the local council's building control team or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Near Cambridge
- Newmarket 12.6 mi
- Ely 15.1 mi
- Huntingdon 15.7 mi
- Haverhill 15.9 mi
- St Neots 16.3 mi
- Letchworth Garden City 21.1 mi
Steel beams in Cambridge: questions
Who approves steel beam installation in Cambridge?
Structural work in Cambridge needs a building notice or full plans application to the local council's building control team or a registered building control approver. We prepare and submit it with the structural engineer's calculations and arrange the inspections, so the completion paperwork follows the job.
Can I stay at home while the work is done in Cambridge?
Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.
What happens at the survey visit in Cambridge?
We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.
Can you work on older or listed homes in Cambridge?
Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.
Do you cover Cambridge for steel beam installation?
Yes. We carry out steel beam installation in Cambridge and the CB2 and CB4 postcode districts. Book a free survey visit and we will check the wall, arrange the engineer's calculations and send an itemised written quote.